---
title: "Sam Lee (@SammyLee99) | Hashnode"
description: "Embedded Software, Solo projects, Firmware, C language, computer, developer. Read the latest articles by Sam Lee on Hashnode."
url: "https://hashnode.com/@SammyLee99"
---

@SammyLee99

# Sam Lee

@SammyLee99 · Joined August 2024

Embedded Software, Solo projects, Firmware, C language, computer, developer

### [6- Completion](https://samlee.hashnode.dev/6-completion?utm_source=hashnode&utm_medium=feed)

Title: Combining Modules Content: Now that we have implemented all the modules for the functionalities, it's time to combine them. First, we need to make the machine controllable. Create three states for the egg incubator: Preparing Incubating Com...

5 min read · [samlee.hashnode.dev](https://samlee.hashnode.dev/6-completion?utm_source=hashnode&utm_medium=feed)

[Sep 17, 2024](https://hashnode.com/posts/6-completion/66e8f8c3c8f8ae597a0e7c81)

### [Making Hardware - Incubator Box](https://samlee.hashnode.dev/making-hardware-incubator-box?utm_source=hashnode&utm_medium=feed)

Prepare a plastic board and a box I prepared a shoe box. We will make a hole in the box so that the inside of the box is visible. Next, create a small hole for the temperature sensor probe and a small space for the hairdryer (heater) to fit in.

1 min read · [samlee.hashnode.dev](https://samlee.hashnode.dev/making-hardware-incubator-box?utm_source=hashnode&utm_medium=feed)

[Sep 15, 2024](https://hashnode.com/posts/making-hardware-incubator-box/66e905b79750412d11027aca)

### [Controlling OLED part 2](https://samlee.hashnode.dev/controlling-oled-part-2?utm_source=hashnode&utm_medium=feed)

This time, let's create a status display. Egg Incubator Current Status: Incubating Incubation Period: 15 days 3 hours Time to Hatch: 5 days 21 hours Hatching Progress: 71% Expected Hatch Day: May 10, 2024 Temperature: 38.5° C Heater: on/off Our goa...

7 min read · [samlee.hashnode.dev](https://samlee.hashnode.dev/controlling-oled-part-2?utm_source=hashnode&utm_medium=feed)

[Sep 13, 2024](https://hashnode.com/posts/controlling-oled-part-2/66e6662bd5697cf6f4c9d4a4)

### [Controlling OLED](https://samlee.hashnode.dev/controlling-oled?utm_source=hashnode&utm_medium=feed)

Hatching an egg takes about 21 days. We will use an OLED to check how long the egg incubator has been running. Displaying it in a clear manner would be ideal. The OLED module we will use is the jmd0.96d-1 module. It looks like this and is also known...

11 min read · [samlee.hashnode.dev](https://samlee.hashnode.dev/controlling-oled?utm_source=hashnode&utm_medium=feed)

[Sep 12, 2024](https://hashnode.com/posts/controlling-oled/66e60c5467e1db9cb7ef7c0e)

### [How to Connect a Relay Circuit: A Step-by-Step Guide](https://samlee.hashnode.dev/how-to-connect-a-relay-circuit-a-step-by-step-guide?utm_source=hashnode&utm_medium=feed)

In my previous post, I connected an AC Relay, an AC Voltage Source, and a Heater plug. Here’s a simple explanation of how I did it. First, prepare an extension cable. Cut it in half. Mark two spots in the middle (where I’m holding with my left hand...

1 min read · [samlee.hashnode.dev](https://samlee.hashnode.dev/how-to-connect-a-relay-circuit-a-step-by-step-guide?utm_source=hashnode&utm_medium=feed)

[Sep 11, 2024](https://hashnode.com/posts/how-to-connect-a-relay-circuit-a-step-by-step-guide/66e1693b685ffc776e21a7ed)
