---
title: "ampheo (@ampheo) | Hashnode"
description: "Electronic Components Distributor. Read the latest articles by ampheo on Hashnode."
url: "https://hashnode.com/@ampheo"
---

@ampheo

# ampheo

@ampheo · Joined April 2025

Electronic Components Distributor

### [How to delay in Arduino?](https://ampheoelectronic.hashnode.dev/how-to-delay-in-arduino?utm_source=hashnode&utm_medium=feed)

In Arduino, “delay” usually means one of two things: 1) Simple blocking delay: delay() / delayMicroseconds() Milliseconds delay(1000); // waits 1000 ms = 1 second Microseconds delayMicroseconds(200); // waits 200 µs Notes delay() blocks: nothin...

1 min read · [ampheoelectronic.hashnode.dev](https://ampheoelectronic.hashnode.dev/how-to-delay-in-arduino?utm_source=hashnode&utm_medium=feed)

[Jan 14](https://hashnode.com/posts/how-to-delay-in-arduino/696765cf46a690a93a90d76c)

### [How to run microcontroller program in Keil?](https://ampheoelectronic.hashnode.dev/how-to-run-microcontroller-program-in-keil?utm_source=hashnode&utm_medium=feed)

To run a microcontroller program in Keil µVision, you usually do one of two things: Run on real hardware (flash + debug via ST-LINK/J-LINK/ULINK) Run in the simulator (only for some MCUs, with limitations) Here’s the practical workflow. A) Run o...

3 min read · [ampheoelectronic.hashnode.dev](https://ampheoelectronic.hashnode.dev/how-to-run-microcontroller-program-in-keil?utm_source=hashnode&utm_medium=feed)

[Jan 13](https://hashnode.com/posts/how-to-run-microcontroller-program-in-keil/696612ffd00ab2c3092eea4f)

### [How to add source file in STM32CubeIDE?](https://ampheoelectronic.hashnode.dev/how-to-add-source-file-in-stm32cubeide?utm_source=hashnode&utm_medium=feed)

Here’s how to add source files to an STM32CubeIDE project (the “right” Eclipse way), plus the common gotchas. Add a new .c/.h file inside CubeIDE In Project Explorer, expand your project. Right-click the folder you want (usually Core/Src for .c and...

2 min read · [ampheoelectronic.hashnode.dev](https://ampheoelectronic.hashnode.dev/how-to-add-source-file-in-stm32cubeide?utm_source=hashnode&utm_medium=feed)

[Jan 12](https://hashnode.com/posts/how-to-add-source-file-in-stm32cubeide/6964c2fb64385c0d368721de)

### [How to evaluate and improve the resource utilization of FPGA?](https://ampheoelectronic.hashnode.dev/how-to-evaluate-and-improve-the-resource-utilization-of-fpga?utm_source=hashnode&utm_medium=feed)

Evaluating (and improving) FPGA resource utilization is mostly a repeatable flow: Measure accurately (what is used, where, and why) Find the true drivers (logic vs memory vs DSP vs routing/congestion) Change architecture / RTL / tool directives wi...

5 min read · [ampheoelectronic.hashnode.dev](https://ampheoelectronic.hashnode.dev/how-to-evaluate-and-improve-the-resource-utilization-of-fpga?utm_source=hashnode&utm_medium=feed)

[Jan 9](https://hashnode.com/posts/how-to-evaluate-and-improve-the-resource-utilization-of-fpga/6960d08dd476f7db143e1084)

### [How to know Wi-Fi adapter driver installed in Raspberry Pi 5 or not?](https://ampheoelectronic.hashnode.dev/how-to-know-wi-fi-adapter-driver-installed-in-raspberry-pi-5-or-not?utm_source=hashnode&utm_medium=feed)

Here’s a reliable way to tell whether a Wi-Fi adapter has a driver installed and loaded on a Raspberry Pi 5 (works for both the built-in Wi-Fi and USB Wi-Fi dongles). You’re basically checking 4 things: device detected → driver bound → firmware loade...

3 min read · [ampheoelectronic.hashnode.dev](https://ampheoelectronic.hashnode.dev/how-to-know-wi-fi-adapter-driver-installed-in-raspberry-pi-5-or-not?utm_source=hashnode&utm_medium=feed)

[Jan 8](https://hashnode.com/posts/how-to-know-wi-fi-adapter-driver-installed-in-raspberry-pi-5-or-not/695f7d6bb10c1eaefc16d360)
