---
title: "Discussion on \"Custom 3D Printer Enclosure – Part 2\" | Hashnode"
description: "Discussion on \"Custom 3D Printer Enclosure – Part 2\". When we  left off before, we had just finished the enclosure box and wired up some lighting. This is where I left it for a good number of months as life, work and other things got in the way, opting to use the printer instead of fiddling with everyth..."
url: "https://hashnode.com/posts/custom-3d-printer-enclosure-part-2/612343f2e404793819cac08c"
---

[Feed](https://hashnode.com/feed) /

Discussion

# [Custom 3D Printer Enclosure – Part 2](https://blog.seth.to/custom-3d-printer-enclosure-part-2?utm_source=hashnode&utm_medium=feed)

When we left off before, we had just finished the enclosure box and wired up some lighting. This is where I left it for a good number of months as life, work and other things got in the way, opting to use the printer instead of fiddling with everyth...

Aug 23, 2021 · 9 min read · blog.seth.to  
Updated Sep 6, 2021  
Read the article

-   [#hardware](https://hashnode.com/tag/hardware)
-   [#3d](https://hashnode.com/tag/3d)
-   [#arduino](https://hashnode.com/tag/arduino)
-   [#raspberry-pi](https://hashnode.com/tag/raspberry-pi)

## Written by

[Seth Voltz](https://hashnode.com/@sethvoltz)

@sethvoltz

  
[View profile](https://hashnode.com/@sethvoltz)

Maker of things

## Responses

Markdown supported · ⌘↵ to post

No responses yet.
