---
title: "Discussion on \"How to place microcontroller in KiCad?\" | Hashnode"
description: "Discussion on \"How to place microcontroller in KiCad?\". Here’s a clear, no-nonsense workflow for placing a microcontroller in KiCad—from schematic to PCB—with practical layout rules so the board boots first try.\n\n1) Schematic: add the MCU and wire it right\n\nAdd symbol\n\nOpen Schematic Editor → press A → se..."
url: "https://hashnode.com/posts/how-to-place-microcontroller-in-kicad/690874074c44080467ef05e9"
---

[Feed](https://hashnode.com/feed) /

Discussion

# [How to place microcontroller in KiCad?](https://ampheoelectronic.hashnode.dev/how-to-place-microcontroller-in-kicad?utm_source=hashnode&utm_medium=feed)

Here’s a clear, no-nonsense workflow for placing a microcontroller in KiCad—from schematic to PCB—with practical layout rules so the board boots first try. 1) Schematic: add the MCU and wire it right Add symbol Open Schematic Editor → press A → se...

Nov 3, 2025 · 4 min read · ampheoelectronic.hashnode.dev  
Read the article

-   [#microcontroller](https://hashnode.com/tag/microcontroller)
-   [#kicad](https://hashnode.com/tag/kicad)
-   [#stm32f103](https://hashnode.com/tag/stm32f103)
-   [#atmega328p](https://hashnode.com/tag/atmega328p)
-   [#esp32-s3](https://hashnode.com/tag/esp32-s3)

## Written by

[ampheo](https://hashnode.com/@ampheo)

@ampheo

  
[View profile](https://hashnode.com/@ampheo)

Electronic Components Distributor

## Responses

Markdown supported · ⌘↵ to post

No responses yet.