---
title: "Discussion on \"How to run microcontroller program in Keil?\" | Hashnode"
description: "Discussion on \"How to run microcontroller program in Keil?\". To run a microcontroller program in Keil µVision, you usually do one of two things:\n\nRun on real hardware (flash + debug via ST-LINK/J-LINK/ULINK)\n\nRun in the simulator (only for some MCUs, with limitations)\n\n\nHere’s the practical workflow.\n\nA) Run o..."
url: "https://hashnode.com/posts/how-to-run-microcontroller-program-in-keil/696612ffd00ab2c3092eea4f"
---

[Feed](https://hashnode.com/feed) /

Discussion

# [How to run microcontroller program in Keil?](https://ampheoelectronic.hashnode.dev/how-to-run-microcontroller-program-in-keil?utm_source=hashnode&utm_medium=feed)

To run a microcontroller program in Keil µVision, you usually do one of two things: Run on real hardware (flash + debug via ST-LINK/J-LINK/ULINK) Run in the simulator (only for some MCUs, with limitations) Here’s the practical workflow. A) Run o...

Jan 13 · 3 min read · ampheoelectronic.hashnode.dev  
Read the article

-   [#keil-vision](https://hashnode.com/tag/keil-vision)
-   [#keil](https://hashnode.com/tag/keil)
-   [#microcontroller](https://hashnode.com/tag/microcontroller)
-   [#stm32f4](https://hashnode.com/tag/stm32f4)
-   [#stm32](https://hashnode.com/tag/stm32)

## Written by

[ampheo](https://hashnode.com/@ampheo)

@ampheo

  
[View profile](https://hashnode.com/@ampheo)

Electronic Components Distributor

## Responses

Markdown supported · ⌘↵ to post

No responses yet.
