---
title: "Discussion on \"Making Hardware - Incubator Box\" | Hashnode"
description: "Discussion on \"Making Hardware - Incubator Box\". Prepare a plastic board and a box\nI prepared a shoe box.\n\nWe will make a hole in the box so that the inside of the box is visible.\n\n\nNext, create a small hole for the temperature sensor probe and a small space for the hairdryer (heater) to fit in."
url: "https://hashnode.com/posts/making-hardware-incubator-box/66e905b79750412d11027aca"
---

[Feed](https://hashnode.com/feed) /

Discussion

# [Making Hardware - Incubator Box](https://samlee.hashnode.dev/making-hardware-incubator-box?utm_source=hashnode&utm_medium=feed)

Prepare a plastic board and a box I prepared a shoe box. We will make a hole in the box so that the inside of the box is visible. Next, create a small hole for the temperature sensor probe and a small space for the hairdryer (heater) to fit in.

Sep 15, 2024 · 1 min read · samlee.hashnode.dev  
Read the article

## Written by

[Sam Lee](https://hashnode.com/@SammyLee99)

@SammyLee99

  
[View profile](https://hashnode.com/@SammyLee99)

Embedded Software, Solo projects, Firmware, C language, computer, developer

## Responses

Markdown supported · ⌘↵ to post

No responses yet.
