1-Channel (3.7-4.2V) USB Battery Power Supply with Level Display Box StationA 3.7 V LiPo box with USB-A output and a press-to-read level display, built two ways around the HW-736 solar charger. Step by step.10 min read·homebotica.hashnode.devNov 9
3-Channel (5-24V) USB 2.4GHz Radio Frequency Driver Panel StationThree USB ports switched on and off by 2.4 GHz radio, each on its own, with an nRF24L01, a ULN2803 and a Nano. Step-by-step build and range.8 min read·homebotica.hashnode.devOct 30
2.4GHz Radio Frequency Transmitter Panel StationA Nano and an nRF24L01 send serial commands over 2.4 GHz radio to any number of USB switch stations. Step-by-step build, range and ideas.7 min read·homebotica.hashnode.devOct 30
Resistive Sensor 2-Channel (5-24V) USB Driver Box StationA light sensor, a resistor and one MOSFET switch a USB device on at dusk, here a tank air pump. No microcontroller, no code. Step-by-step build.8 min read·homebotica.hashnode.devOct 29
Soil Moisture Presence Colour-Spectrum LED Box StationA small station by your plant that shows soil moisture in colour, white when dry to red when soaked, with a sound per level. Step-by-step build.7 min read·homebotica.hashnode.devOct 29