Discussion on "ESP32 Embedded Rust at the HAL: Remote Control Peripheral"

Omar Hiari · 2023-06-22T14:08:24.416Z

This blog post is the tenth of a multi-part series of posts where I explore various peripherals in the ESP32C3 using embedded Rust at the HAL level. Please be aware that certain concepts in newer posts could depend on concepts in prior posts. Prior ...

I liked your article. A good candidate for part 11 would be showing how to use the Touch sensor built into most of the ESP32 and S series chips.

Thanks! Great idea! Im looking into doing a series with a different series chip than the C3 sometime. The current dev kit I got for the C3 doesn't have the touch sensor though.

Omar Hiari I purchased a esp32s3 from weact and it seems to work fine with rust. The esp32s2 by wemos doesn't seem to work. I think boards with a cp2102 USB serial port work ok but boards relying on built USB for serial fail due to issues with enabling cdc for debug. It may be that I just missed a configuration option.

Joseph Ellsworth Could be. There could be other factors too. Unfortunately, I'm not too familiar with those boards. You can try to see if you can get help on the esp channel on Matrix.

Discussion

ESP32 Embedded Rust at the HAL: Remote Control Peripheral

Responses(1)

Recent in Forum

Search Hashnode

ESP32 Embedded Rust at the HAL: Remote Control Peripheral

Responses(1)

Recent in Forum