#fpv-beginner articles

RRRonnie Rosallevelupfpv.comNov 6, 2025 · 13 min read

Building a Nuclear Hazard Lap Timer

I’ve been testing out the Nuclear Hazard Fission Kit, and it’s one of the best DIY lap timer systems for small FPV race setups.It’s modular, accurate, and once configured, you can run up to eight pilots at the same time. If you’re looking to set up a...

0

RRRonnie Rosallevelupfpv.comOct 26, 2025 · 1 min read

Bay Area Micro Racing | Round1 Hayward Meetup Recap | 10.15.2025

The Round1 Hayward event turned out to be a great evening of flying. I arrived at 3 PM to book the room for our 4 PM to 10 PM session. Once we got in at 4 PM, I started clearing the space by moving tables, chairs, and couches, which took about 10 to ...

0

RRRonnie Rosallevelupfpv.comSep 5, 2025 · 2 min read

FPV Beginner Guide #2 — Add a Binding Phrase (ExpressLRS)

Goal: Make your radio and quad auto-connect every time using the same binding phrase. What you need Quad with ExpressLRS receiver Computer with Wi-Fi USB data cable Small desk fan Steps Safety first USB power only (don’t plug in the flight b...

0

RRRonnie Rosallevelupfpv.comAug 28, 2025 · 6 min read

Long-Term Review: Happymodel Mobula7 HDZero

After my initial review, I’ve been flying the Mobula7 HDZero hard—daily flights, crashes, and mods. Here's what’s new. ✨ Highlights (Quick Takeaways) 4–5 minutes of flight time on 450/550 mAh packs, even with beat-up batteries. Frame and canopy st...

0

RRRonnie Rosallevelupfpv.comAug 28, 2025 · 7 min read

Mobula6 HDZero Race – Initial Review

The Mobula6 HDZero Race just landed on my bench, and I’ve been putting it through its paces with Lava 300mAh 1S HV packs. Here are my first impressions. 📹 Video & Camera Quality The HDZero system keeps latency ultra-low, which is exactly what y...

0

RRRonnie Rosallevelupfpv.comAug 22, 2025 · 8 min read

Meteor75 Pro + HDZero Whoop Lite Build (Step-by-Step)

Goal: Convert a BETAFPV Meteor75 Pro 1S PNP to HDZero using the Whoop Lite Bundle, reusing a canopy for mounting the HDZero Nano V3 camera. Difficulty: This is an easy-to-advanced build. It’s easy because it’s solder-free, but repinning the JST harne...

0

RRRonnie Rosallevelupfpv.comAug 21, 2025 · 4 min read

🛠️ Beginner FPV Drone Kit – What I Recommend

One of the most common questions I see on Reddit and in FPV groups is:“What kit should I start with?” All-in-one beginner kits are okay to get you flying fast, but they don’t really grow with you. A better path is to buy gear piece by piece that you ...

0

RRRonnie Rosallevelupfpv.comAug 16, 2025 · 10 min read

Initial Review: Happymodel Mobula7 HDZero — Agility, HD Clarity & First Flights

(Full long-term review coming soon) 🔑 Key Takeaways Super agile: Lighter than my Meteor75 Pro O4, with hover around 25–30% throttle. Gap killer: Low canopy design lets it slip into tiny spaces — I even flew it under my bed. Durable design: Foam ...

0

RRRonnie Rosallevelupfpv.comAug 14, 2025 · 2 min read

FPV Beginner Guide #1

Welcome to the first post in my FPV From Zero to First Flight series!This series will walk you from opening your FPV gear to your first safe flight — no prior experience needed. In this first guide, we’ll cover how to set the ExpressLRS (ELRS) bind p...

0

RRRonnie Rosallevelupfpv.comAug 13, 2025 · 6 min read

You Got All Your Gear — What to Do Next (Safe First Setup)

Congrats! You’ve got your radio, goggles, charger, and whoop. This guide walks you through a safe, first-time setup so you don’t brick anything, lose your configs, or spend hours troubleshooting. Note: This guide assumes you already know some basic ...

0

#fpv-beginner

Search Hashnode